You are here: Home arrow Pressurised water (9-96kW)
  • Decrease font size
  • Default font size
  • Increase font size

Pressurised water to 160°C (9-96kW)



The 'P140 & P160'  

(previously Viceroy)            



These pressurised units deliver precise high temperatures with limited need for maintenance and offers increased

energy efficiency to the customer.

Common industry applications:

Plastics Industry/Injection Moulding,

Food production processes, Chemical and Pharmaceutical Jacketed Vessels.

This unit comes with the following standard features:

  • Solid State Relays
    Energy savings due to pulsing every 0.3 seconds
    (contactors generally every 16 seconds). Offering increased  accuracy and with no moving parts wear and tear is eliminated.
  • Auto Shutdown System
    If a pipe breaks the machine will stop and lock the water supply system down to prevent any leaks.
  • Castors
    Enables easy manoeuvrability.
  • Pressure Sustaining Accumulator
    Reduces the use of pressure relief valves.
  • Direct Acting Self Cleaning Solenoid Valves
    With no diaphragm this helps reduce the maintenance needed, due to the minimal manual cleaning required.

  • Diagnostic Controller
    Helps maintenance by showing knowledge of any faults that occur.
  • Air Release Bottle
    Protects the heating elements and pump where large amounts of air could be present in the process.
  • Non Ferrous internal parts
    Helps to keep the system clean, no rust from the units internal components.
  • Stainless Steel Heat Exchanger
    Large gaps between the plates reduce the risk of blocking due to contamination and helps increase efficiency.
  • Low Volume Tank
    Low volume individual tubular heater tanks, which reduce the liquid volume in circulation, resulting in a reduced power input required for heating.

Options available on both:

 Controller available with a number of language chips
 Switchable remote and local sensing
 Process machines protocol interface
 IP 55 rated electrical specification
 Stainless steel panels
 Various flow and pressure options
 Bespoke machines made to order
 Direct cool
 Increased Cooling
 Pneumatic tool purge

To book an on site demonstration please call Tricool Thermal on 0800 977 5709